What specialist testing can show
TI-5000JX bench. Verify the supported Athena BiSS profile, connector and supply for the exact full suffix before bench checks.
TI-3000JX motor run. Mitchell lists AD58-1222 under Generic BiSS run additions. Verify motor poles, amplifier and commutation procedure for the actual motor.
Starting lead. Exact Mitchell lead depends on the verified AD58 suffix and motor connector.
Hengstler AD58-1222 BiSS Multiturn Encoder technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| AD58-1222 | Mitchell’s named Generic BiSS multiturn run profile. Match the actual interface and feedback configuration. |
| AD58/1222A1.0IBCB · 0547167 | Hengstler catalogue example with BC for BiSS-B plus 1 Vpp sine/cosine and a final B for the radial 12-contact PCB connection with cable. Verify the exact assembly drawing. |
| AD58/0022 · TCG120 | The existing singleturn guide. The 0022 and 1222 profiles have different turn-count data. |
Production and end-of-life status
Hengstler lists catalogue item 0547167 as quote only. Confirm availability of the actual suffix with Hengstler.
Specifications
| Parameter | Verified scope |
|---|---|
| Within one turn | 22-bit position in the documented 1222 resolution code. |
| Revolutions | 12-bit turn count on the multiturn profile. Verify the position word and any status fields with the configured receiver. |
| Supply and interface example | The 0547167 code specifies 5 V, BiSS-B and 1 Vpp sine/cosine. Other AD58 interface and supply options need their own configuration. |
Interface and measuring method
On the BiSS version the controller supplies a clock and receives a position frame. Read the within-turn position and turn count as separate fields. A drive set for the wrong word length or protocol can show unstable or implausible positions while the encoder still responds.
Mounting and fit
Match the order drawing to the shaft or bore, coupling type, locating features and rear cover clearance. Record how the motor fixes the encoder body and strain relief before disturbance. Compare fit with the exact item drawing before choosing another AD58.
Wiring and connector scope
Locate supply, return, clock pair, data pair and any configured analogue pairs in the fitted suffix drawing. The presence of a clock pair is insufficient to distinguish SSI from BiSS. Verify the receiver settings and the connector view.
Internal motor and machine cables
Determine the test fixture by the full AD58 connector and supply code. Find the OEM internal loom and external cable by the fitted motor and drive order. Verify pair allocation and shield arrangement before rebuilding a cable.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| Angle within a turn is right but turn count is wrong | Compare the configured AD58-1222 frame with the actual multiturn unit and receiver field lengths. |
| Bench shows no valid frame | Confirm BiSS versus SSI, the supply, pair assignment and the exact profile. |
| Angle jumps after refitting | Check seating and coupling as well as the original position reference. Compare with a controlled motion on the correct fixture. |
Angle of alignment and commissioning
Retain the incoming position and turn data and the motor’s commissioning record. Verify zero and the turn rollover in the matched system before returning it to use. Commutation offset is an OEM setup value.
Motor and drive applications
AD58-1222 Generic BiSS profile
Confirm the fitted order suffix, BiSS configuration, mechanical fit and connector drawing.
Related SpareFaber guides
Drawings, pin maps and manuals
- Athena new features and tester support. Athena 5 additions, Generic BiSS AD58-1222
- Hengstler AD58/1222A1.0IBCB · 0547167. Exact catalogue example and AD58 family options.
- Hengstler AD58 BiSS/SSI technical datasheet. Connection table, connector drawings, supply and resolution order code.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.