What specialist testing can show
TI-5000JX bench. Use the fitted SRM profile and the applicable Allen-Bradley memory test.
TI-3000JX motor run. Mitchell directs MPF users to the appropriate MPL run selection. Confirm the fitted option first.
Starting lead. TI-5057 or TI-5058 on the documented MPF connection, after matching the fitted plug. Module TI-5104 for the matched classic HIPERFACE path.
Allen-Bradley Kinetix MPF M HIPERFACE Multiturn Servo Feedback technical reference
Find your part number
Compare the fitted feedback label, complete motor order and connector. A motor order and an encoder MPN identify different items.
| ID or order | How to identify it |
|---|---|
| MPF feedback code M | Rockwell lists 1,024 sin/cos periods and absolute multiturn HIPERFACE for this code. |
| MPF-A320H-MJ74BA | Rockwell’s documented 230 V, 100 mm frame example with multiturn high-resolution feedback. Match the complete label. |
| Fitted SICK Stegmann part | Capture the exact fitted SRM variant and its memory before selecting a replacement or direct lead. |
Production and end-of-life status
Confirm orderability and any replacement with the manufacturer against the full fitted ID. The linked documents identify the documented setup.
Specifications
| Parameter | Verified scope |
|---|---|
| Feedback | Classic HIPERFACE multiturn with 1,024 sine/cosine periods on the M option. |
| Example envelope | MPF-A320H-MJ74BA is a 100 mm frame with 50.8 mm stack-length designation in the Rockwell record. |
| Connector | Select by the MPF frame and connection code. Mitchell lists distinct 17-contact M23 MP arrangements. |
| Motor information | Mitchell documents stored MP-family motor data, including the alignment reference. |
Interface and measuring method
The drive uses analogue process signals and a serial parameter channel. A feedback alarm can originate at either path, the cable, or stored configuration. Check the fitted SRM profile and the drive’s motor setting.
Mounting and fit
Use Rockwell’s MPF outline, shaft seal and connector installation instructions. Record the original seal and rear cover arrangement before service. Verify the exact encoder mounting and connector from the fitted label.
Wiring and connector scope
Use Rockwell’s signal connector and motor cable table. Mitchell identifies different TI-5057 and TI-5058 arrangements. Check the motor-side connector and keying, then verify the direct SRM connector separately.
Internal motor and machine cables
Choose the Rockwell machine cable by motor, drive and connector code. For internal loom replacement, confirm the fitted encoder and rear assembly drawing. Preserve the specified seal and screen installation.
Fault checks
Use the site’s isolation procedure before opening a connector or checking resistance. Secure the load against motion, lock out relevant energy sources, wait the specified discharge time and have a qualified technician verify isolation. Follow the OEM procedure for any retention battery.
What can I check on the machine?
Disconnect the harness at both ends. Check end-to-end continuity against the exact drawing, then check for unintended shorts between conductors and to the shell or shield. Compare against the documented shield bonds. Inspect pins, keying, debris, moisture and latch engagement. Check clamps or fasteners only where accessible under the approved procedure.
Use only the OEM-approved powered check and a suitable breakout. A qualified technician can compare the voltage across the specified supply and return with the model’s limits under the stated test conditions. A multimeter can check supply health. Signal integrity and communications require the appropriate signal test.
| Symptom | What to verify |
|---|---|
| Drive rejects a replacement | Compare the original motor memory, code M and fitted SRM identity. |
| Feedback faults during motion or after washdown | Inspect cable entry, moisture, screen termination and the mating connector. |
| Serial data reads and motion signal is erratic | Check the sine/cosine reference and process pairs through the full harness. |
Angle of alignment and commissioning
Read and preserve the original motor memory. Use the Allen-Bradley memory and commutation references for the exact motor with an approved fixture. Verify physical alignment against the incoming reference before closing the assembly.
Motor and drive applications
Rockwell Kinetix MPF food-grade M option
Identify the MPF M code, verify the sealing and connector arrangement, and preserve the motor memory.
Related SpareFaber guides
Drawings, pin maps and manuals
- Allen Bradley Motors. Feedback Type Selection, use MPL selections for MPF, and SRS/SRM table
- Rockwell Kinetix MPF installation instructions. Frame, motor code, sealing and cable connection information.
- Rockwell Kinetix rotary motion specifications. MPF order-code table and M feedback description.
- Rockwell MPF-A320H-MJ74BA cut sheet. Exact MPF M example. Confirm the fitted internal encoder separately.
- Mitchell MP-series memory and alignment. Scope of motor memory and electrical alignment checks.
- Mitchell cable index. TI-5057 and TI-5058 connector-specific scope.
Questions
Can I use a similar label as a replacement?
Compare the interface, mechanical fit, connector, data or commutation requirements and OEM option before choosing a substitute. The ID table gives the useful distinctions for this guide.
What information helps with a diagnosis?
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.
Site visit or send-in evaluation
Send the encoder and motor labels, drive model, alarm history and both connector views. Say whether the problem began after cable work, encoder replacement or a drive change. We can confirm visit scope or send-in evaluation and timing from those details.